Month: May 2022

While DIY water installation might seem like a good idea at first, there are a lot of risks involved and, not to mention, it’s far more difficult than it might appear to be. On top of that, it can cost you a lot of money down the line and cause problems that could pose a risk to you and your family. That’s why you need one of the top Calgary water heater installation companies to handle your water heater installation.

Professionals are Trained to Install Water Heaters

When it comes to installing a water heater, you yourself simply can’t match the skills, training, and knowledge that a licensed technician or plumber has. You might be able to follow the directions and find tips online, but getting the job done right the first time means hiring a trained and licensed professional to handle the installation of a water heater.

Water Heaters Pose a Fire Risk

You might not be aware, but a water heater poses a significant fire risk – particularly if it isn’t installed properly. That’s because many water heaters rely on gas as a fuel source, which is highly flammable. While you might feel confident in your DIY skills, improperly installing your water heater could cause it to explode.

Water Heaters Can Release Carbon Monoxide

Given that combustion is part of the process of heating the water, carbon monoxide is produced by your water heater. However, if the tank and its components are installed properly, then there’s no need to worry as the gas will be properly vented and pose no risk. But an improper or poor installation can interfere with the water heater’s ability to vent carbon monoxide. And since carbon monoxide has no taste or odour, but is extremely dangerous, it’s safer to hire a professional than run the risk of causing a leak within your house.

Improper Installation Can Decrease Home Value

When it comes to installing a water heater, having the right parts and components makes a big difference. There’s just so many makes and models of water heaters on the market – from tankless to a standard gas unit – that it’s extremely important to find a professional who not only know what they’re doing, but has all of the tools, technology, and knowledge needed for the installation process.

For those looking for a professional Calgary water heater installation company, then look no further than Westhills Plumbing & Heating! Contact us today for your water heater installation! 

If you’re noticing problems with your hot water heater, it could be that it’s just in need of a quick repair. However, sometimes the problems indicate that there’s something seriously wrong that’s classed as an emergency. When that happens, you need urgent Calgary water heater repair. Here’s what to look out for if you suspect that you’ve got a water heater emergency on your hands.

Sediments in the Tank

One of the most common causes of a water heater emergency is caused by something that’s otherwise relatively harmless. Naturally, the water that enters your water heater has minerals in it that gradually build up into sediments in your tank.

Sediments in the tank can cause a host of problems. These can include taking a long time for water to heat up and can cause hot spots to form in your tank, as the sediments trap heat beneath themselves. Eventually, these hot spots will cause your tank to spring a leak.

The solution is that you need to have your water heater flushed several times a year to prevent sediment from building up. That’s when you need Calgary water heater repair.

Corroded Anode Rod

The anode rod is there to protect the water heater tank from corrosion, by being made of a material that attracts corrosive elements. Generally speaking, if your anode rod is corroded beyond safety measures, then it needs replacing. You should have your anode rod replaced at least every five years, which will save your water heater from breaking down prematurely.

Water Pressure’s Too High

Your water heater can, potentially, dramatically burst and cause a lot of damage. This is caused when the temperature within the water heater reaches a dangerous level – which is anything around 140 degrees Fahrenheit. That’s why you need to be sure that you set your water heater’s temperature correctly (anything between 120 and 125 degrees Fahrenheit). If not, then you need to call in immediately for Calgary water heater repair.

If you’ve got a plumbing or water heater emergency, then don’t hesitate to reach out for immediate water heater repair in Calgary. Contact Westhills today!

Generally speaking, over time your sewer lines may begin to clog. Being able to identify when it’s starting to happen will help you address the problem before you end up with a sewer line back-up that floods your home with sewage water. If you’re finding yourself with a clogged sewer line, then you need to know when to call a sewer line cleaning service. Here are four signs that your sewer line might be clogged.

Slow-Moving Drains

Noticing that water pools when you run water? If that’s the case, then it can be a sign that there’s a clog. That’s because drains tend to slow down when there’s a clog as the majority of sewer line clogs occur gradually and don’t completely block the pipe. Rather, over time, debris accumulates and makes it harder for waste and water to move through the pipe.

If you’re noticing that all of the drains in your home are slowing down, then the problem is likely to be a clogged sewer line. You’re likely to first notice this phenomenon with your toilets, as they’re usually directly connected to your sewer line.

Dark Water

If you’re noticing that, when you pull the plug on your bath and shower drains, that water is backing up, that’s a sign that there’s nowhere for the water to go. The water, then, moves backwards and seeks the lowest point of entry – which is likely a drain in your basement. And, unlike water leaks, the water that backups won’t be clear. Generally, the water that backs up will be dark and rather gross-looking.

It’s important to know that this water can contain raw sewage, so you need to be cautious when dealing with it. Make certain that you’re using the proper cleaning supplies and protective gear when you’re cleaning up any dark water backups in your home.

Gurgling Noises

Given that a clog in your main sewer line keeps your drains from functioning properly, you’re probably going to notice some odd things happening in and with your plumbing. The most common noise that’s reported is a gurgling noise from drains when they’re used, which signifies that they’re not working at optimal capacity and that there’s likely a clog in your mainline.

Clogged Fixtures

If the clog in your sewer line goes unnoticed and unfixed for long enough, then you’ll start to notice that your drains stop working altogether. You’ll start finding that your plumbing fixtures stop draining entirely. And since these fixtures are all connected, that means that a clogged sewer pipe will keep all of the fixtures in your home from draining.

If you’re noticing any of the above signs, then it’s time that you call a sewer line cleaning service – like Westhills. If you’ve got a clogged sewer line, we can help. Give Westhills a call today!